Category Archives: Dell Laptop Support

02Mar/21
Fix Dell Laptop Camera Not Working

Dell Laptop Camera Not Working

If Dell laptop camera not working error occurs since Windows 10 upgrade then, this issue possibly caused by the driver’s conflicts or a faulty driver. A few users complained about the same problem. So we have tried to provide flawless hacks to resolve this problem, after reviewing their reports.

Such a problem occurs when the laptop has been used longer or even when Dell is the first user. When the Camera is tried to run in the webcam app, a black output is shown with an Icon. No camera app works by extension. This article is sufficiently helpful here.

Dell Laptop Camera Not Working

How to Resolve Dell Laptop Webcam not working?

This article section contains all the possible fixes that will help you to fix this problem if this camera does not work on a Dell laptop problem.

Fix 1: Update the Device Drivers

The main cause of the Dell laptop camera not working Windows 10 is usually outdated or old device pilots. So you must be sure to update your device drivers. If that is not the case, you must update it immediately. To do this, the following instructions must be followed:

  • Go first to the Start icon, then see the Device Manager.
  • Choose the top result of the list to open the window.
  • Now, expand the hardware category you needed to upgrade with the device manager.
  • Just right click on this device once you’re done and press the button Driver update.
  • You must then search for the “Search for the updated driver software automatically” button.
  • Once this button has been found, just click it.
  • You can press the button Install Update if updates are available.
  • Wait a while now before the process is finished.
  • Finally, restart your device and check whether the problem is resolved.

Fix 2: Reinstall Device Drivers

If the issue still persists after the device drivers have been updated, it is recommended that the device drivers be reinstalled. To do this, follow the following steps:

  • Click the Start icon in the first place and go to the Search box.
  • Now, just type ‘Device Manager’ in the search box on the taskbar.
  • Then choose it from the list of results.
  • Click on the device right here and find the button Uninstall.
  • Simply restart the system afterwards.
  • Now, the device drivers will be reinstalled by Windows.

Fix 3: Update BIOS

Outdated BIOS may also lead you to a non-work problem for your Dell laptop camera. You must therefore update the BIOS to solve this type of problem.

To achieve this, you must first go to the settings. You then have to look for the Update & Security option in Settings and select it. Now, click Recovery on the left menu button. Hit the Reboot Now button, which is under the Advanced Installation, once you have done. The Troubleshoot button must be found here. Once this button has been found, simply click on it and navigate to Advanced Options. Next, select UEFI Settings for the firmware. Once finished, simply press the Reboot button to refresh your device.

Fix 4: Install the Latest Windows Updates

In addition, for the Windows Update, please check. If the Automatic Update button must be uncontrolled, uncontrolled. You may therefore be waiting for the latest updates, and Dell laptop camera doesn’t make a Windows 10 mistake in these instances. Then you will have to go to the Start button and navigate to the Settings if you want to instal all pending Windows upgrades. The ‘Update & Security’ button needs to be found. Only click that option and then press Windows Update once you have located the button. Tap the button ‘Check for Updates.’ Select the Install Updates option if there are pending updates or updates available. You just reboot your device once you do this action. All Windows updates that are pending will then be installed on the device.

Fix 5: Run the Hardware Troubleshooter

The Dell laptop cameras could sometimes resolving a problem by running the Hardware Troubleshooter. You can therefore follow these steps if you want to perform this process:

  • To begin with, press the Windows logo and W function keys
  • Now starts the search box.
  • You must type “troubleshoot” here and press the Enter button.
  • Select ‘Hardware & Device’ now and execute the troubleshooter.

Fix 6: Check the App Permissions

If you still have the same problem after following the above fixes, you have to check the application allowances. Go simply to the Settings app and search for permissions in this case. You must ensure that there is access to the device via the webcam.

Fix 7: Temporarily Disable the Webcam

According to numerous users, this kind of problem could be resolved after disabling and then restarting the Device Manager webcam. Therefore, this action can be done. To do this, click on the webcam with the right-click button Disable Device. Hit the restart button once you’re done. Then, return to the Device Manager and activate the button again. Now, the issue needs to be addressed.

Related Blog:- How to Fix Dell Hard Drive Error Code 2000-0145?

I hope your issue is fixed, after applying all the above solutions.

In case, if you face the issue again and unable to fix the problem then you should take Dell support experts help to fix it.

Call at Dell Customer Support To Obtain Instant Help:-

You can dial Dell Technical Support Phone Number +1-844-200-2814 at any time from anywhere to Fix Dell laptop webcam not working issue it is a toll-free number and 247 days for your online assistance. By number, you can connect to the Dell Customer Support team that works to support you with 247. The well-experienced and certified technicians are smart enough to handle any technical problems or errors of Dell Laptop / Computer. The skilled experts will provide you with comprehensive guidance to solve this error instantly. Technicians will also provide you with hasty, easy and finest solutions to solve other problems with Dell laptops. Contact the experts now for further assistance.

01Mar/21
How To Turn Off Touch Screen On Dell Laptop?

We are usually acquainted with a touch screen for a smartphone or tablet. But some Dell laptops also provide touch screen facilities in this modern technological era. The most frequent use of a keyboard and mouse to enter something is, though, not comfortable with the notion of a contact screen. You need to know How to turn off touch screen on Dell laptop if you are uncomfortable or are faced with problems with the touchscreen of your Dell device. Unfortunately, this touch screen cannot be switched off on a laptop by any third-party software. Therefore, if you don’t know how to disable Dell laptop touchscreen, then go through this article.

How To Turn Off Touch Screen On Dell Laptop

Reasons to Disable the Touch Screen on your Dell Laptop

While the touch screen gives the user some added benefit, you may sometimes encounter problems. You then have to uncheck and use the input mouse and keyboard. Let us examine some likely causes that can cause the touch screen to disable:

  • Drivers outdated often cause the problem of touchscreen. You must then turn it off as quickly as possible.
  • The touch screen sometimes reacts slowly. Some inputs take a long time to show up. You must disable this touch screen if you want to experience hazardous typing.
  • For many of us, the keyboard and mouse are convenient as the output device. So, if you are ready to use these two as your output device, the touch screen must first be disabled.
  • The battery life drains the touchscreen more quickly. So you must disable the touch screen if you want to save battery life.

Effective Steps to Turn Off Touch Screen on Dell Laptop

No Built-in switch is available to disable the touch screen. So, don’t panic if you don’t know how to do this. Just perform these steps one by one which we mention below.

For Windows 10/8.1 User

Step 1: Open the Device Manager

  • To open the Run box, press the keyboard’s Windows key and R key combination.
  • Enter the Enter key by typing ‘devmgmt.msc’ in the Run box.
  • The device manager will be invoked.

Step 2: Find the Touch Screen Device

  • Find ‘Human Interface Devices’ Search.
  • To extend this category, click on it.
  • You find ‘Touchscreen compliant with HID’ under this option.

Step 3: Disable the Touch Screen

  • Choose this specific touch screen.
  • The Context menu is available.
  • Select under it the option ‘Disable device.’
  • Click YES to switch off the touch screen to confirm this.

Step 4: If you Want to Enable the Touch Screen Again

If you want to use this touch screen again, just follow these instructions below:

  • Restart the Device Manager.
  • Choose the ‘ HID-compliant touch screen,’ as previously mentioned.
  • Select ‘Enable Device’ and click on this.
  • It helps you to re-activate your touch screen.

For Windows 8 User

Click Windows + Q on the keyboard simultaneously.
Then type on the search box ‘Control Panel.’
The ‘Hardware and Sound’ option is now available. Click it. Click it.
Select the option ‘Pen & Touch.’
Choose the Touch tab now.
Disable “Use your finger to enter,” to disable the touch screen.

Related Blog:- How to Solve Dell Error Code 2000-0142?

Get Online Tech Support for Dell Issues At Single Call Dell Customer Support Service:-

You can dial Dell Customer Care Support Number +1-844-200-2814  to instantly connect with our proficient Dell customer support experts and get best solution For ‘how to turn off touch screen on Dell laptop’ and other technical troubles. Our number is available 24×7/365 days through the year for help, as we are the reliable and trustworthy Dell customer support providers and deliver the users immediate help & guidance to their Dell laptop related technical issues. With the help of our experienced and certified technical support experts, you can fix this error or other kinds of Dell issues efficiently within a few minutes. Hence, call us now for getting urgent help & guidance for Dell problems.

26Feb/21
How To Adjust Brightness On Dell Laptop

You may be having trouble watching a video or reading something if the brightness of your Dell laptop is too small. Failure to do this could lead to eye strain if the brightness is too high. Therefore, the brightness of your laptop should be adjusted in this case. Sometimes adjusting the brilliance directly from the taskbar becomes very difficult. Therefore, we will use some possible methods in this article on how to adjust brightness on Dell laptop. Moreover, you get to know some easy hacks to solve in the event that Dell’s laptop lightness doesn’t alter the error.

How To Adjust Brightness On Dell Laptop

How to Change Brightness on Dell Laptop

The methods on how to change brightness on Dell laptop are listed below:

  1. Using display properties.
  2. By using shortcut keys.
  3. Using Control Panel.
  4. By using Windows Mobility Center.

Method 1: Using Display Properties

Use the display properties to adjust the luminosity. Please take the following steps:

  • Right-click the laptop screen at first.
  • Then, in the list, select Display Properties.
  • Click Color Correction after that.
  • Now move the indicator to the left to reduce the glow. Drop it right in the “Brightness Scale” section to increase the brightness.
  • Next, select the ‘Apply’ option and press OK.

Check now if the brightness of your laptop is adjusted. Follow the methods listed below if the brightness is not modified.

Methods 2. By using Shortcut Keys

With the shortcut keys you can change the brightness. To increase the brightness, press the Fn key and the top arrow key at the same time. To decrease luminosity, press the Fn key and the down arrow key.

Methods 3: Using Control Panel

Follow the steps below to modify the brightness using the check panel:

  • Press the Windows button at first.
  • Then select from the left column Control Panel.
  • Click the ‘Hardware and Sound’ option afterwards.
  • Then choose ‘Power’ options and adjust the brightness as you wish.

Method 4: By using Windows Mobility Center

Follow the following steps to change your Dell laptop’s brightness with the Windows Mobility Centre:

  • Type “Windows Mobility Center” in the search panel and press the Windows key.
  • Click on the required option in the list below.
  • Now adjust the brightness from the window of the Windows Mobility Center.

Easy Steps to Resolve Dell Laptop Brightness won’t Change

Sometimes you may not find the brightness modified while you try to adjust the luminosity of your Dell laptop. This usually happens if my display lights are adjusted to automatic mode. This is the problem. Therefore, in order to solve the Dell laptop brightness won’t change  Isssue, go through the steps mentioned below:

  • To simultaneously open the Setup menu, press Windows key and I key.
  • Then, in the Settings window, click on Display.
  • Next, delete the tick sign right next to the box ‘Adjust automatically the screen lights.

It is not a tough task to adjust the brightness on a Dell laptop. Therefore, go through the above methods to adjust the brightness. Also, if you cannot modify the brightness and know how to adjust the brightness on the Dell laptop, apply the fixes provided for in this article.

Related Post:-: How to Fix Dell Error Code 2000-0141?

24Feb/21
Resolve Dell Laptop Stuck In Airplane Mode In Windows 10

Dell Laptop Stuck In Airplane Mode

The “Dell” multinational corporation constantly provides news and exclusive features. One of those features is that the Airplane mode is a perfect way for Dell laptops to use on flights. However, at times when Dell Laptop Stuck In Airplane Mode it can be very distracting. This problem typically arises due to unintended settings adjustments during the wireless interface setup. This error may also be caused by a corrupted or defective network driver. If you have a problem and don’t know how to turn off Dell laptop aircraft mode then read this post. This article. We will discuss in this content the primary triggers and the leading-edge solutions for overcoming Dell’s laptop in Windows 10 problem Airplane Mode.

Dell Laptop Stuck In Airplane Mode

Causes of Dell laptop stuck in Airplane mode

 The Dell laptop stuck in airplane mode because of several causes of this mistake. One of the key reasons for this is the ‘off’ wireless switch. Then you will not be able to turn off your Dell laptop’s airplane mode. Often this mistake may also lead to a faulty driver or a compromised network driver. Another major reason for this problem is a bad BIOS or because of unnecessary changes in the network adapter properties. But in any Dell laptop, this problem is very popular and can easily be solved. In the next segment, we will review all the efficient hacks to remove your laptop from this problem.

Steps To Fix Dell laptop Stuck In Airplane Mode On Windows 10

We have drawn up as soon as possible a list of some rapid means of overcoming this problem. You can try all of the solutions or select all methods to address the problem.

Method 1: Use the Keyboard Shortcuts

The main method is to disable the plane-mode via the link icon, on your taskbar or using keyboard shortcuts. This method can be used. Follow the steps to deactivate aviation mode with keyboard shortcuts:

  • Keep on your keyboard for a few seconds, at the same time, the FN+WiFi key.
  • Now, release the buttons once you have a “Off-the-airplane” message appearing on your phone.

The Dell laptop airplane problem would be resolved if the shortcut method works. Find another way, if the problem goes on.

Method 2: Change the Network Adapter Properties

If the previous solution doesn’t work, you must attempt to solve this problem by adjusting network adapter properties from the adapter settings. Take the following steps to adjust the settings of the network adapter:

  • To open the system manager and browse the Network Adapter portion, press Windows+X key simultaneously on your keyboard.
  • When a new window opens, expand your wireless adapter and check for your content.
  • Click right on the Wireless  Adapter and go to the Power Management page. Please click right.
  • Now, press the “Allow the device to turn off to save power” option on the OK button. Agree then on Apply to save the new setup.

After the steps are completed, a message on your screen that says ‘Airplane Mode Off’ will appear. Should the message not be released, the problem will remain. Go to the following process.

Method 3: Re-enable the Network Connection

Often some internal failures can lead to a network connection failure. Therefore, to get rid of Dell Laptop airplane mode won’t turn off error you must restart the network connection. Follow the steps mentioned below:

  • Press Windows+S and browse to Settings simultaneously on your keyboard.
  • Select ‘Networking and Internet’ in the list by clicking on Settings, to open the menu.
  • Now browse the left pane, pick the Network menu and then click on the Internet tab. Then, from the list, Select the WiFi option.
  • Switch from the right corner of the window to the Change Adapter option and right-click the Wireless Connection option.
  • Next, pick the option Disable and repeat the same procedure to enable it.

To save changes, click OK and add. Apply. Then restart your laptop to see if the problem continues. Try another approach listed below if it still continues.

Method 4: Update the Network Adapter Drivers

You will use a defective Network Driver quite probably. Therefore you must upgrade the network adapter driver if the airplane feature malfunctions on your Dell laptop. Some steps to implement this method are given below.

  • To open the search bar, click Windows+S, simultaneously on your keyboard.
  • Type the Device Manager now, without quotes, and press Enter to continue.
  • Expand the Network Adapter contents from the Device Manager tab and right-click the icon on your Network Adapter.
  • Now select the menu option “Update Software Driver” and click on the search option to update the driver on your Dell laptop.

The modified version of the network driver will be downloaded using this form. Upon completing the update, uninstall the.exe file and follow the on-screen instructions to run the program file. Restart your laptop in Dell and see if the mistake continues. Try the next solution, if the problem persists.

Method 5: Do a Clean Boot on your Laptop

If you use an application from a third party, it creates network issues on your system. The only way to solve this problem is therefore to carry out a new boot. To do a clean boot on the Dell laptop, simply follow the steps below.

  • To open a run command box, press the Windows+R key simultaneously on your keyboard.
  • Now type “msconfig” into the command box and press Enter or just select OK to proceed.
  • Navigate to the Services tab and check the Device Setup option ‘Hide all Microsoft Services.’
  • You can go to the Startup tab and then click the Open Task Manager connection. Click the option “Disable Every button.”
  • To disable the option from the main menu, select the first item on the list from the startup tab.
  • Return to Device Settings and press Apply and then OK in order to save the changes.

Restart your computer after enabling each application and check whether the issue persists or not.

Related Blog:- How to Fix Dell Laptop Keeps Shutting Down?

Contact Dell Customer Care Support Service at  +1-844-200-2814  To Get Instant Help:-

Simply dial phone number  +1-844-200-2814  at Dell Customer Support to assist you on how to turn off Airplane mode in Dell laptop and other technical quires. To solve this Dell problem, you’ll easily connect with the team of experienced and certified technicians. The highly qualified and certified will provide you with comprehensive guidance to solve your problem. They will also help you with the optimized solutions to fix other types of Dell technical errors or problems in a shorter period of time. Contact the skilled experts now and get instant help for Dell mishaps.

22Feb/21
How To Fix Dell Laptop Keeps Shutting Down Issue

Dell Laptop Keeps Shutting Down

Dell laptops can be automatically switched off if their internal components are overheated. This is part of any Dell user’s popular issue. Often shutting down the laptop Dell may be helpful, as it protects your device against additional threats. However, if your Dell laptop keeps Shutting Down unexpectedly, then you have to patch it as soon as possible. In this article, we will demonstrate all methods by which the abrupt shutdown problem can be easily avoided.

Causes Behind Dell Laptop Randomly Shuts Off Without Warning

Here we have listed some causes of Dell Laptop Randomly Shuts Off Without Warning issue. Check the points given below:

  • If you do not move the cooling fan in your normal fashion.
  • Cable power does not work correctly.
  • Play video games with a graphical strength.
  • Motherboard problem or computer virus presence.
  • Hardware and thermal problems (overheating of CPU)

These are the basic causes of Dell laptop keeps shutting down unexpectedly. Now look in the next section at the effective solutions.

Step-by-Step Guidance To Fix Dell Laptop keeps Shutting Down on Startup

Here, we have discussed some easy steps to resolve Dell laptop keeps shutting down issue. Just follow the steps below:

Step 1: Wrong Charger Voltage/ Overheating Fan

Any problem with the refresher or power supply can cause the laptop to shut down abruptly. Start now with the power supply review. The problem is not connected if the fan moves quickly and smoothly. However, you need to reconfigure it if it doesn’t work properly. Place a brush on the fan and then check the electricity supply. It is time to replace the power supply if it gets overheated. Notice whether the Dell laptop keeps shutting down or not after making the required adjustments.

Step 2: Fix the Faulty Hardware

Another primary reason Dell’s laptop Suddenly shuts down is a failure in a hardware component. If you have new hardware installed recently, try removing it. Try to uninstall any unnecessary hardware, such as a network card, modem and other devices that are not currently required. Now run your Dell laptop and see if it really does or does not happen.

Step 3: Computer Virus

You could be facing this problem if you have malware or virus in your system. Run an antivirus software to address the problem immediately. If the device is still being upgraded and then the laptop is put on a complete scan.

Step 4: Problem with the Operating System

Due to the fault in the operating system, this issue can also happen. Try the steps below to check for an error in the OPS:

  • Reboot and join the CMOS configuration as your laptop continues to boot.
  • After you sit idle in CMOS, your computer is switched off.
  • If not, the installation of the device may be corrupted.
  • In this situation, the operating system should be uninstalled and reinstalled.

Step 5: Driver Crash

Your machine will shut down unexpectedly by a driver crash. Using your computer’s right driver. The new driver from the official Website can also be downloaded. The problem can be solved by this method.

Step 6: Remove the Shutdown Option

The turn-off button can also be deleted from the start menu. Track the step:

  • Click the Start button first and then the Search Box.
  • Type ‘gpedit.msc’ in the search box and click Enter.
  • Expand your device setup window now.
  • Then press the ‘Delete and Prevent Access’ button on the right panel and choose Shuts Down option and set it to the Allow option.

Now, check for the problem and note if it is still there or not.

Related Blog:- How to Solve Dell Laptop Bluetooth Not Working?

Dell Customer Support Number Is Available 24×7 to Online Support-

Are you still facing this issue with the Dell Laptop Shutting Down for a long time? Call us straightaway following the toll-free Dell Printer Support . Else, email or chat with us online to share your issue and place your service requests.

The rest is our responsibility to offer you with the time-bound support at a cost-effective rate. Furthermore, you can also expect regular latest service updates from our end.

17Jun/20
dell-touch-screen-laptops
How to fix Dell XPS 15 Laptop Screen Flicker

[Fixed] Dell XPS 15 laptop Display flickering

If you’re a user of the Dell laptop and often encounter the Dell XPS 15 Screen flicker problem then this guide will surely help you fix the problem. Screen flicker is a common and troubling issue for all users of Dell laptops. Imagine a scenario where you perform an important job and your screen starts to flicker randomly.

Dell XPS 15 screen flickering

That is one of the most frustrating experiences you can ever experience. So take the necessary measures and eliminate the error as quickly as possible. If you don’t know the exact process to handle this error, take the help from this article. We will address here all the useful approaches and solutions which will make your job much easier.

Easy Solutions to Fix Dell XPS 15 screen flickering Issue:

Now, now is the time to let you know about some of the productive solutions that you can implement to address the Dell XPS screen flicker issue on your own. To get rid of the situation without any hassle, go through the steps mentioned below.

Solution 1

Simple step by step to fix Dell XPS 15 Laptop Screen flickering issue.

Step 1

First, click the Start menu button located at the bottom of your computer’s left-hand side. Click on the Settings icon then

Step 2

A grid of Windows Settings will appear on your screen after you click on that. And then, click on the Devices icon.

Step 3

You have to scroll down and switch to the bottom of the page after you’re finished with all the steps listed in the above section. Click the Devices and Printers link then.

Step 4

Post this, your screen will have the Device Manager window appear. Then, double-click on the option Display adapters from the list that appears before you. Then double-click on the option Intel HD Graphics 530 where the last digits may vary with a different system type.

Step 5

Now will start the window for Intel HD Graphics. Then click the Drivers tab at the top of your computer screen, and then click the Driver Update option.

Step 6

When the new Window will appear on your screen now, click on the Search automatically option and follow as per the on-screen instructions. While finishing all the task now, you have to check if the problem with your Dell XPS 15 9550 flickering screen is resolved or not. If the problem still persists then, you may follow the next method.

Solution 2 for Dell XPS 15 Laptop Screen Flicker

Here’s another procedure that can help you get the Dell XPS screen flicker fixed. Go through the five simple steps to solve your on the go question.

Step 1

You have to Turn on your computer to do it at first. You need to shut down your system by pressing and holding the power button when the OS Loading Screen appears in front of you.

Step 2

Wait a few minutes after that to complete the automated process of repairing and press the Advanced Options button. Then pick the Advanced option and troubleshoot options.

Step 3

While finishing these steps you have to click on the Start-up settings option which will be appeared on the next screen. Then go to button restart.

Step 4

The machine will now restart, and you can choose the Startup Settings according to your preference. And, choose Option 4. Then, press the F4 key from your keyboard to enable Safe Mode.

Step 5

Right-click the Start button on the next step, and select the option Apps and Features. Then scroll down to your new Window and click on the link Program and Features. This option is located on your computer screen on the right hand side. Then go to the Intel Graphics Driver search list and then click the entry and then click the Uninstall button. After completing all the mentioned steps before, now you have to restart your computer and then, install the correct driver.

Conclusion

The above steps will effectively help you get rid of the Dell XPS 15 Screen flicker problem. If you need more information about this topic then visit our website or opt for help from a professional.

Related Blog : Forgot BIOS Password Dell Laptop

21Apr/20
How to Fix windows 10 error code 0xc00000f

Error code 0xc00000f windows 10

After Windows 10 1909 update, won’t Windows start? Getting the BCD Error Code 0xc000000f/0xc0000225 at startup with a blue screen? This Windows 10 Error code 0xc000000f directly specifies that BCD (Boot Configuration Data) does something wrong. And it couldn’t load the application or operating system because a required file is missing or contains errors.

How-to-Repair-Error-Code-0xc00000f-in-Windows-10-pic-1

Causes of windows 10 error code 0xc00000f

The most common reason for the error code 0xc000000f is because BOOTMGR is not able to find the BCD file. Power outages, disk-write errors or incompatible devices could cause it to be damaged or missing. Whatever the reason, we have different solutions here to help fix error code 0xc000000f Windows 10.

Remove and restart all external devices, such as external HDD, USB Drive, Printer, Scanner. After adding new hardware to your computer recently: remove it, restart the computer and check if the error screen will appear again.

Perform Startup Repair

Perform Startup Repair from advanced boot options that diagnose and fix problems automatically to prevent windows starting normally.

  • To do this You need to boot system from windows installation media. If you don’t have then create a new installation media / Bootable USB.
  • Skip The first Screen and next on installation screen Click Repair Computer.
  • This will Restart windows
  • Next click Troubleshoot then Advanced Options.
  • Click on Startup Repair to start the diagnose process.

This will scan Fix If any programs normally cause windows to start. Windows after That restart and check Started normally.

Set correct partition as active

Some Times this error screen appears because an incorrect partition is set as active, you can use the diskpart utility to set the correct partition.

  • For this again access advanced options then click command prompt.
  • Now Type Disk Part and hit the enter key.
  • Next type List Disk, hit the enter key.

And the Windows installation partition must be Active you can do this by type command active. Restart windows and check Started normally.

Rebuild BCD in Windows 10

The “File:” row mentions “\boot\bcd” on certain errors as a potential corrupted or damaged file that causes the “Your PC needs to be repaired” screen to appear, along with the exact error code in the “Error code:” row. In these cases, you can rebuild the BCD as it could damage or corrupt your computer’s BCD file.

To Rebuild damaged BCD again Access Advanced options and click on Command prompt.

Now Perform Bellow commands to rebuild The corrupted BCD.

  • Bootrec.exe \fixmbr
  • Bootrec.exe \fixboot
  • Bootrec \rebuildBcd
  • Bootrec /Scanos

This will definitely fix the configuration data and thus, the BCD Error Code 0xc000000f in Windows 10 will. Also, Check for Disk Errors by the following below.

Check Disk Drive Errors

After rebuilding BCD On Same Command prompt type chkdsk / f / r to check and fix disk drive errors, bad sectors, causing the boot error. When you type in this will start the disk error scanning process. Wait until the scanning process is completed by 100 per cent. You will get a screen after the scanning process is complete as shown below. Type Exit to close the command prompt and then restart the windows start normally without any Startup Error.

Create a new EFI Partition

EFI partition may be absent in certain circumstances but don’t worry because you can comfortably create a new one. But make sure to have a “Windows installation media” (bootable USB / DVD) and a free disk space of 200 MB before that.

Skip the first screen on the next screen Press Shift + F10 to open Command prompt. Then type the following commands successively and press Enter after each of them: Note the letter (ltr) down. You will also need to recognize the volume ltr containing your Windows partition

Now type: bcdboot C:\Windows / l en-gb / s B:/f ALL; assuming, for the EFI, that C is the letter for Windows partition besides B.

That’s All Now Reboot your PC and check if windows normally start.

21Jan/20
dell-laptop-support
How to Reset Dell Laptop BIOS Password ?

Reset Dell Laptop BIOS Password

Laptops have a master password which is referred to as the BIOS password. BIOS is also known as “Boot Firmware” (Basic Input Output System). It checks and initializes components of a laptop’s hardware, such as a video chip, sound card etc. Being an important factor behind the operating systems and programs runtime services, you can’t do anything without BIOS, so learn about Reset Dell Laptop BIOS Password.

Forgot BIOS Password Dell Laptop?- An Ultimate Guide To Reset It

So, this can be a problem for users who forgot Dell laptop’s BIOS password and are unable to access the BIOS. But, don’t worry, we’ll discuss the main steps here, by which you can easily reset your BIOS password. Keep on reading this article to learn how to restore Dell laptop bios admin password.

So, this can be a problem for users who forgot Dell laptop’s BIOS password and are unable to access the BIOS. But, don’t worry, we’ll discuss the main steps here, by which you can easily reset your BIOS password. Keep on reading this article to learn how to restore Dell laptop bios admin password. who forgot BIOS password Dell laptop and are unable to access the BIOS. But, don’t worry.

Reset Dell Laptop BIOS Password

Here we’ll explain the key steps by which you can quickly reset your BIOS password. Keep on reading this article to learn how to restore Dell laptop bios admin password.

Methods to Reset BIOS Admin Password on Dell Laptop

Here, if your Dell laptop is locked up, we will talk about the best steps you can easily apply to access the BIOS. Follow the following steps, then:

Method 1: Accessing the Hard Disk

The principal item of a BIOS is a hard disk. So, you have to access the hard disk before performing this move. To do it:

  • Firstly, when you turn on your computer, enter the CMOS startup menu by pressing the DEL, F2 or Ctrl+ Alt+ Del key, simultaneously from the keyboard.
  • Now go into the Standard CMOS Setup option during the boot sequence.
  • Then, to find the control panel for the hard disk. Now change the mode of type to Auto, and reboot the system.
  • Now, you will have to access the hard disk, from this menu. You should be able to find the basic system password.

You must set up the BIOS password by this stage. If this method is not familiar to you, then you can go for the next methods. This can help you solve the problem.

Method 2: Flashing the BIOS in Software

  • First, the command prompt contains MS-DOS access and type DEBUG. It’ll show you the menu on Debug.
  • Then, type the following command for the process: AMI/AWARD BIOS: “O 70 17 O 71 17 Q”
  • Now, you will see the BIOS setup menu, from that set the new password.

So, this step helps you fix the BIOS issue. If this step does not benefit you, you will be able to take the next step.

Method 3: Access BIOS from the Support Bracket

If the above steps are not working for you, you may take this step.

  • At first, completely shut down the Dell laptop and remove all the devices attached to it.
  • Then hold down the Power button for a few times to limit the access of the motherboard.
  • Now, unwind the screws at the back end of the case. After disconnecting all the connected cable from the last support bracket. Then, reinsert the screws and switch on the laptop.
  • Now, reconnect all the devices previously connected to the laptop.

You’re totally done. Now, you can access the BIOS again.

Method 4: Clear the CMOS Setting

CMOS requires the latest BIOS environment. To achieve this move follow the following steps:

  • First detach the power cable from the plug.
  • Then remove the laptop cover.
  • Locate the password connector on the system board.
  • After removing the 2-pin jammer plug.
  • Now remove the CMOS jumper from the system board.
  • Eventually, attach the cables of your laptop to the socket..

This method will fix the problem stuck in your Dell laptop BIOS. If not, you can then take the next move.

Method 5: Reset the CMOS Battery and BIOS

It is another method by which you can reset the BIOS. Carrying out this step:

  • Disconnect the external power source device and detach the main battery from the machine.
  • Detach the Dell laptop cover and locate the CMOS coin cell. Now remove the coin cell.
  • After that, push the control shell from 5 to 10 seconds. Reinsert and reconnect the coin cell. After that the devices are installed for operation testing..
  • When the laptop turns on you will be able to see that the time and date is not set. So, you have to set it on your own.

This basic step can help you easily access the password for the lost Dell BIOS laptop.

This article gives you a quick idea of how to access BIOS, if you forget Dell laptop’s Bios password. Hopefully the above methods will help you fix this issue. If you have any concerns, then you can add them to the section below for feedback.

31May/19
dell-laptop-support
How To Set-Up A New Dell Inspiron Laptop For The First Time

Of-course the excitement of buying a new laptop is slightly being tricky with the fact that users now need to set up the machine in ready state for the purpose of usage. Though we know that the setup is a time-consuming task, the Dell Inspiron takes you through most of the procedures with the help of onscreen prompts as well as instructions. Once the initial setup is complete, according to Dell Inspiron Laptop Technical Support experts, users are free to spend even more time in personalizing the Dell laptops by installing programs as well as transferring data.

Dell Inspiron Laptop

Steps to Set-up new Dell Inspiron laptop

Step1: Power Up

  • The new Dell is out of the box device and is purposefully a preferred device for thousands of users across the globe. Connect the adapter to the port which is located at the back side and plug into the wall to easily start charging the device.
  • Press the power button in the upper left corner just above the keyboard to boot up the device for the very first time as instructed by Dell Inspiron Laptop Tech Support
  • Windows will now start, and users will be prompted to select their country by asking them to accept the license agreements and select preferences for various settings given over there.
  • Follow all the onscreen prompts to configure the Windows according to user’s choice

Step2: Recovery Discs

  • Once the Windows has finished its installation and setup mode, a new desktop will be in front of the users. Before starting the installation process of other programs, take a moment to create the recovery media process first.
  • These discs will then come in handy if users need to restore their laptop to all new fresh-from-the-factory operational section. To do this, one needs an 8GB USB key or a DVD-R, DVD+R or even may be Blu-ray disc is required, depending on what kind of media a user is referring to use the disc drive.
  • To write the recovery disc, simply place the DVD or Blu-ray into the drive and open up the Dell Data Safe Local Backup program right under the Start menu.
  • Selection of the “Create Recovery Media” option is to be made and then follow all the onscreen instructions defined. Next, one is required to burn the disc.

Step3:Wi-Fi and Internet process

  • Plug in an Ethernet cable simply at the back of the laptop or you can even connect to a wireless router carefully.
  • Turn on the laptop’s Wi-Fi by pressing the “Fn-F2” button. An icon will be visible in the screen to alert users to use the wireless connection status. Once the connection has been enabled, just open up the Control Panel and search for the “Network and Sharing Center” option right now.
  • Next, select the “Connect to a Network” option and follow all the given instructions. Unless users have set up a new Internet connection or have created a new network which can easily be done by selecting the “Set up a New Connection or Network” option.

Dial Dell Inspiron Laptop Customer Support Number USA @  +1-844-200-2814  (toll-free)

Well as of now, the Dell Inspiron laptop has fully been set-up. Still if you have any issues with it then do give us a call by reaching out at Dell Laptop Customer Support number which toll-free in nature.

27May/19
dell-laptop-support
How to Fix Dell Inspiron Error Code 8142?

Dell Error Code 8142 generally occurs on Dell Inspiron 1545 laptop or computer, when you are trying to install new programs without the old programs being completely uninstalled. Or sometimes the error may come due to hard drive issue, registry issue, malicious software such as adware, spyware, and viruses, etc.

So, what are the reasons behind the occurrence of this Error Code 8142, you don’t require to take tension or panic! As explained by the Dell tech support team of proficient experts, this error can be easily resolved by applying the simple steps. Thus, you can also easily Fix Dell Inspiron Error Code 8142, by just following the simple steps, which are given below.

Fix Dell Error Code 8142

Steps to Fix Dell Inspiron 1545 Error Code 8142: 

Step 1: – Verify Laptop Hard Drive
  • You should try to verify that Dell Inspiron laptop hard drive is properly setup. You have required verify that the cabling connecting of your hard drive to the motherboard is secure.
  • Confirm that all of the mounting screws are tight, and the Dell hard drive is correctly fitted inside of the case.

Check the error is resolved, if it is not, and then go to the next step.

Step 2:- Check Window Problem By Manual Solution

You should try to verify your laptop window. To do this, you must have to follow these instructions.

  • Click on “Start” button on your system, then go to “All program”, and then choose “Accessories” option.
  • Choose the “system restore” option.
  • After making a system restore point, restore your computer to an earlier point.
  • Finish the process of System restoration successfully.

After performing the step 2 may be your Dell Error Code 8142 resolved.

Step 3:- Automatically Fix Issue with Repair Software

You should try to download and then run a full system scan tool on your system to take the issue.

  • First, download and install system scan tool by visiting the website.
  • Find and choose the correct software as per needs and OS.
  • Then download the software program on your system.
  • Next, install the program by clicking on it, and hit the “Scan” button.
  • Click the “Fix Errors” button when the scan is completed.
  • Then restart your computer normally to have a check.

Now check error Dell Error Code 8142 is resolved.

If still, the same problem, then you take experts help to fix it.

Dell Customer Support Number

Call at Dell Customer Support Service To Receive Instant Help:-

You can dial at Dell Inspiron Support Number   +1-844-200-2814   to make an immediate connection with our proficient Dell customer service support team. The toll-free number is available 24×7 days for assistance, so you can connect with techies anytime and grab the easy instruction to fix this error. Hence, get in touch with our technical support professional now, who works day and night to help. We assure you will get the best possible solutions & reliable support to fix other kinds of Dell laptop technical errors or issues.